3D printed case
You can print a case for a Raspberry Pi that runs Chatter. The files are in the folder hardware/case/ of the repository. The case fits a Pi 3A+. To fit another Pi or device, change the design in the .f3z file.
| File | Use it to |
|---|---|
ChatterBox_3DPrintable.step | Print the case. Many slicers open STEP files. If your slicer cannot, open the file in a CAD program and export an STL or 3MF file. |
ChatterBox_3DPrintable.f3z | Change the design in Autodesk Fusion. It has the case and a model of the Pi 3A+. |
What you need
- The 2 printed parts: the Base (bottom) and the Housing (top)
- A Raspberry Pi 3A+ with the Chatter card. See Install on a Raspberry Pi.
- 4 screws to close the case: McMaster-Carr 90485A435
The 4 screws go up through the Base and through the 4 mounting holes of the Pi. Then they go into the Housing.